There was one area of the pan that had rusted through…otherwise the pan is in reasonable shape for a 47 year old VW. The small area that rusted through was in the area under the jump seat on the drivers side. That area was cleaned up with a wire brush and the area painted with Eastwood’s rust encapsulator, The the area was reinforced with fiber glass and finally painted.
 |
| Under the jump seat on the drivers side…some areas at the back edge had rusted through. |
 |
| The area under the drivers seat had some surface rust but otherwise was structurally sound. It was cleaned up and treated with rust encapsulator and the area in the back was fiber glassed to close the gaps and strengthen the area. |
The rest of the floor pan had some areas where there was some surface rust starting to form. These areas were cleaned up with a wire brush and treated with the rust encapsulator followed by paint.
 |
| Front floor pan on the drivers side was in good shape |
 |
| Front drivers side cleaned up and treated with the rust encapsulator. |
 |
| Passenger side front floor pan before treatment. |
 |
| This is the pan under the passenger side seat…some surface rust with some minor pitting. |
 |
| This is the area under the jump seat on the passenger side of the car. |
 |
| Passenger side floor pan after rust encapsulation treatment. |
